Engineers available UK-wide today
Standards · Compliance map

The codes your auditor will ask about — covered.

Compliance isn't a deliverable; it's the foundation. Every BWS service is delivered to a named industry standard, with evidence and certification mapped to it. Here's the full compliance map.

Reference map

Sixteen standards. One audit-ready evidence base.

ACOP L8 Legionella Control — HSE Approved Code of Practice
The legal benchmark for control of Legionella in water systems. Sits on the Health & Safety at Work Act 1974 and COSHH 2002.
HSG274 Pt 1 Cooling Towers & Evaporative Condensers
HSE technical guidance for the highest-risk Legionella system class. Backed by the Notification of Cooling Towers Regulations 1992.
HSG274 Pt 2 Hot & Cold Water Systems
Practical detail behind L8 for the systems present in every building — flushing, temperature monitoring, calorifier inspection, sampling.
HSG274 Pt 3 Other Risk Systems
Spa pools, humidifiers, ornamental fountains, dental units, vehicle washes — anywhere water aerosolises.
BS7592:2022 Sampling for Legionella
The methodology — container, transport, hold time. Get this wrong and the result is meaningless.
BS8552:2012 Sampling of Closed Heating & Cooling Systems
Quarterly sampling of closed water systems for chemistry and microbiology — feeds the BG50 acceptance regime.
BS8558 Potable Water — Design, Install, Disinfection
Code of practice for services supplying water for domestic use — including BS8558 disinfection certification.
BSRIA BG29/2021 Pre-Commission Cleaning of Pipework
Flushing, chemical cleaning, passivation — the gateway standard for closed water systems pre-handover.
BSRIA BG50 Water Treatment for Closed Systems
Ongoing chemistry for heating and chilled circuits — what 'clean' looks like for the life of the building.
BG04 / BS2486 Steam Boiler Water Treatment
The chemistry standards for treating water in steam boilers and water heaters — feedwater, condensate, boiler chemistry.
CIBSE Code M Commissioning Management
The UK headline guidance for managing commissioning on a construction project.
CIBSE Code A / W Air and Water Distribution Balancing
Technical standards for balancing and validating ductwork and pipework distribution.
BESA TR19® Internal Cleanliness of Ventilation
Industry standard for ductwork hygiene including kitchen extract cleaning intervals.
DW144 Sheet Metal Ductwork Specification
The design standard against which ductwork cleanliness is verified.
HTM 04-01 NHS Water Safety
Healthcare technical memorandum — safe water in healthcare premises, including augmented care.
HTM 03-01 NHS Specialised Ventilation
Healthcare ventilation hygiene — operating theatres, isolation rooms, decontamination spaces.